home *** CD-ROM | disk | FTP | other *** search
- Path: telepost.no!usenet
- From: jornilse@telepost.no (J°rn Ove Nilsen)
- Newsgroups: comp.sys.amiga.graphics
- Subject: Re: Cybervision
- Date: 11 Feb 1996 11:47:35 GMT
- Organization: TelePost Public Access
- Message-ID: <1291.6615T765T90@telepost.no>
- References: <695.6610T930T2219@telepost.no> <oj668dgnvxb.fsf@hpsrk.fc.hp.com>
- NNTP-Posting-Host: drammensnett106.telepost.no
- X-Newsreader: THOR 2.2 (Amiga;TCP/IP)
-
- In article <oj668dgnvxb.fsf@hpsrk.fc.hp.com>, at 09-Feb-96 12:25:20 Steve
- Koren <koren@hpsrk.fc.hp.com> wrote:
-
- >> new mode in screenmode preferences, but when I start CVMode, I have a big
- >> list of 17 resolutions. I can't open a test screen from CVMode either. An
- >> error message like this comes up instead; Can't open testscreen!
- >CVMode is terrible. I can manage to open a test screen if I run it with
- >the ADVANCED option and specify my board using the BOARD option.
- >Otherwise, no dice.
- I've managed to solve my problem, since there were som unfriendly patches that
- cybervision refused to work with.
-
- >CyberGfx is generally a lot nicer than the old EGS system, but one thing
- >EGS had going for it was that its screenmode creator program was much
- >better than CVMode. But luckily once you manage to get some useful
- >modes set up you don't generally have to mess with it too much after that.
- I have heard the same, but that's the only downer 'bout cybergfx.
-
- >> The card is fabric new, and should not have any defects, I got V2.15 of the
- >> software, V1.38 of cybervision monitor driver, buster rev.11 and enough
- >> RAM.
- >The problem is CVMode, not your board, which is probably fine.
- yes, and no, hehe..
-
-
- j°rn nilsen <jornilse@telepost.no>
- <sb>
- * FORD Fix or Repair Daily.
-
-